The VK1035 PA system connects effortlessly to almost any analog phone system and produces up to 60 watts of paging power which can operate up to fifteen 8-ohm paging horns or speakers. This system offers more than power capabilities because it enables efficient wired PA setups through analog phones which deliver high-quality audio messages.
Easy Analog Phone Integration
Setting up is a breeze. Just set the FXO/FXS switch to FXO, connect the phone wires to screw terminals 5 and 6, and you're ready to go. When the phone goes off-hook, the PA-15 pauses for one second, sends a pre-announce tone (if enabled), and allows you to broadcast your message. The system automatically ends the page when the call is hung up.
Prefer your own equipment? You can use any analog phone with this system, including options like the Analog Phone available on Amazon.
Powerful and Versatile Features
- 60 watts of paging power for reliable performance.
- Supports up to 60 8-ohm speakers or 100 70V/25V speakers.
- Dual amplified zones for separate paging areas.
- Individual input gain controls for precise adjustments.
- Built-in protection against voltage, current, thermal, and short circuits.
- High efficiency packed into a compact design.
Specifications at a Glance
- Power Supply: The device features an included UL-approved adapter converting 100–240 VAC at 50/60Hz to ±24VDC with 60W power capacity
- Dimensions: The dimensions of the device measure 5.25” x 3.5” x 1.75” or 133mm x 89mm x 44mm.
- Operating Range: The device functions best between 0°C and 32°C (32°F to 90°F) with humidity levels between 5% and 95% non-condensing.
- Frequency Response: 40Hz to 20kHz for excellent sound clarity
- Input Sensitivity: 1.25Vrms; Maximum Gain: 22dB.
- Harmonic Distortion (@ 1kHz): -60dB.
- Connections: Two 6-position screw terminal blocks.
Compact, Efficient, and Built for Performance
The VK1035 combines a compact size with powerful features to serve schools, offices, warehouses, and any setting that needs dependable high-performance paging.g.
Take control of your communications today with the VK1035 PA system!
Features
- 60 Watts of total paging power
- Two separate amplified zones of paging
- Drive up to 60 8 Ohm speakers
- Drive up to (100) 70V or 25V speakers
- Separate input gain controls for each channel
- Voltage, current, thermal, and short circuit protected
- Super high efficiency allows high power in a small package
- Power: 100 - 240 VAC 50/60Hz to +/- 24VDC 60w UL
- listed adapter provided
- Dimensions: 5.25” x 3.5” x 1.75” (133mm x 89mm x
- 44mm)
- Shipping Weight: 3 lbs (1.36 kg)
- Environmental: 0°C to 32°C (32°F to 90°F) with 5% to
- 95% non-condensing humidity
- Paging Output: 60 watts - powers up to (60) 8 ohm
- speakers or (100) 70V or 25V speakers
- Maximum Gain: 22dB
- Input Sensitivity: 1.25Vrms
- Harmonic Distortion @ 1kHz: -60dB
- Frequency Response: 40Hz to 20kHz
- Connections: (2) 6 position screw terminal block
_thumbnail.jpg)
