This 64" pedestal accommodates tall cars, SUV, and small truck/bus
height applications. This pedestal does not have a baseplate, but
instead has an extra 22 inches of length so you can set it into cement
for easy installation. A threaded hole for 1/2" conduit is mounted on
the backside just above the 22" mark to pass electrical wiring through
for attached electronics.
The pedestal contains the same 4" x 4" universal faceplate as other pedestals. It
is bent with special tooling to ensure that the neck has a smooth,
non-concave curvature to maintain its 2" x 2" dimension all the way
through the bend.
Features of all Pedestal CEO Pedestals:
The faceplate design uses a universal hole pattern that fit hundreds
(if not thousands) of electronics on the market.
All pedestals are made using 11 gauge (.120") steel instead of the
lighter 14 gauge (.083") material others use. The use of heavy steel
reduces the chance of damage or wobbling after installation.
The powder-coating process used includes a 3-stage wash cycle,
drying, a thorough covering of an outdoor-use polyester powdercoat,
baking to powder's manufacturing specifications, and rapid cool down.
Pedestals are built to last in the harshest outdoor weather.
All pedestals are boxed individually with the necessary carriage bolt
hardware which eliminates the need to make a trip to the hardware store.
All In-Ground models contain a 1/2" drill/tapped conduit hole on the
back side of the post for easy wiring.