Intercom Visitor Auto Messages


Pre-recorded messages

An intercom with visitor auto messages is an intercom that plays a recorded message when someone presses its button. These intercoms also allow two-way communication as well.
At IntercomsOnline.com we have wireless callboxes that are equipped to use pre-recorded voice messages that notify radio system users when specific events occur. These unique voice messages are recorded and stored on the callbox, and automatically played back when the associated event occurs. It supports 5 different message events and comes from the factory with no messages recorded.
The five event messages are as follows:
  • Greeting Message: This message plays when a user presses the Talk button on the Callbox. You can use it to record instructions for the user to follow such as " Welcome to our facility. An attendant will be with you shortly. "
  • Identification (ID) Message: The ID message is transmitted automatically when the Talk button is first pressed. This message identifies which Callbox has been activated. A typical message might be, " South delivery entrance" or "Main Gate." The message will be retransmitted every time the button is pressed until it is answered. If the Greeting Message is used, the ID message is transmitted after the greeting is played. The ID message can be periodically until the Callbox is answered. It is also sent ahead ahead of a Sensor Detect or Low Battery/Power Fail messages.
  • Low Battery/Power Fail Message: This message is automatically transmitted when low voltage is detected on the Callbox. The message may say something like " Power failure" or "Low Battery." The ID Message is sent immediately before this message.
  • Sensor Detect On Message: This message is automatically transmitted when a switch attached to the Sensor Input is closed. A typical message may be something like, " Door opened," "Motion detected ," or "Vehicle present." The ID Message is sent immediately before this message. A typical message may be something like, " Main Gate," Vehicle present."
  • Sensor Detect Off Message: This message is automatically transmitted when a switch attached to the Sensor Input is opened. A typical message may be something like, " Door opened," "Motion detected ," or "Vehicle present." The ID Message is sent immediately before this message.intercom with auto messages
Here are some of the products that have this capability:

MURS Callbox XT
UHF Compact Callbox
MURS Compact Callbox

There are also callboxes that just send the recorded message with no voice communication.
UHF Customer Service Callbox
MURS Customer Service Callbox

If you need help choosing a system for you please call us at 888-298-9489.