Home >

Photoelectric Beam Sensor
Photoelectric Beam Sensor


 
Item Code: PR-11BE
Our Price: $186.00
Qty:

Description
 
This is a two part system that includes the optical sensor and a reflector that goes on the opposite side of a path you want to monitor. When something breaks the beam it closes a switch. Can be used to monitor vehicles or people.

Can be used indoors. Power supply not included. See Related Products and Accessories for a power supply that will work.


Features
  • Product type: Photoelectric Beam Sensor
  • Detection system: Near infrared beam interruption system (reflective)
  • Protection distance: Outdoor 1-11m (3.3-36ft) or less; Indoor 1.15m (3.3-49ft) or less
  • Supply voltage: 10.5V to 30VDC (Non-polarity)
  • Current consumption: 55mA or less
  • Alarm output: Dry contact relay NO/NC
  • Contact action: Interruption time (minimum 2 seconds)
  • Contact capacity: 30V AC/DC, 0.5A or less
  • Tamper output: Dry contact relay N/C
  • Action: Activated when cover is detached
  • Contact capacity: 30V AC/DC, 0.5A or less
  • Response Time: 0.05sec to 0.7sec (adjustable by potentiometer)
  • Alarm LED: Red LED; ON: when an alarm is initiated.
  • Attenuation LED Red LED: ON : when beam is attenuated.
  • Functions: Monitor output
  • Ambient temperature range: -25°C to +60°C (-13°F to +140°F)
  • Mounting positions: Indoor/Outdoor
  • Wiring: Terminals
  • Weight: Sensor 430g (15oz); Reflector : 490g (17oz)
  • Appearance: Sensor: PC resin (wine red); Reflector: acrylic resin (clear), AES resin (black)

Related Products and Accessories
12 Volt DC, 1000mA (1 Amp) Power Supply
Our Price: $32.00

Add
12VDC Power Transformer with screw terminals

Share your knowledge of this product with other customers... Be the first to write a review