Hot Line SIP Intercom (no backbox)

This hot-line intercom lets you program a phone number in it so anytime the handset is picked up, it will call that number. It can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered.

The intercom consists of a heavy gauge stainless steel panel and a all metal powder-coated housing. The number is programmed into the hot-line intercom using a standard touch tone phone that you provide. Any phone with tone dialing will work. To get into programming mode, you call the phone number of the hot-line phone.

The product mounts on a flat surface using a double-gang electrical box.

It connects to a SIP telephone system so you will need your IT/networking people to install this.

• 2 Amp relay contacts for door / gate or SL-2 Strobe Light control
• Blue “Call Connected” LED indicator
• SIP compliant 
• PoE powered (class 1, <4 Watts)
• Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
• VoIP audio detection eliminates the need for “Push to Talk” mode
• Handsfree operation
• Marine grade 316 stainless steel prevents corrosion
• T-10 Torx security screws for added security
• Laser etched graphics
• Programmable to dial up to 5 numbers
• Cycles through backup phone numbers on busy or ring-no-answer
• Hangs up on busy signal, time-out or touch tone command
• Programming software included
• Network downloadable firmware
• Remotely programmable
• Diagnostics for testing mic, speaker, and relay
• Extended temperature range: -40°F to 140°F (-40°C to 60°C)
• Flush mount using a double -gang electrical box.