Pedestal Mounting Poles
Made in the USA by the Best Craftsmen in the Industry; These Heavy-Gauge Steel Pedestals Withstand Category 5 Hurricane Force Winds and Anything Else Mother Nature Throws at Them.
These have several names: gooseneck pedestal, pedestal poles, card reader pedestal, gate keypad post, intercom bollard, steel pedestals, intercom pedestals, and others, but they all serve the same function. That function is to hold an intercom, camera, biometric reader, card reader, keypad, or telephone entry system an an entry point such as a gate or door. The are made of heavy gauge steel and they have a mounting hole pattern that fits most standard systems. Pedestal poles are available in a variety of finishes and configurations for various vehicle heights and device configurations. In addition to the poles below we can also custom make poles for you. See more details at the bottom of this page.Look beneath the poles below for info on selecting the right size poles for your needs.
For instructions on how to install our pedestals, click here: Pedestal Installation
Featured Products
This low-profile pedestal is perfect for applications in tight spaces.
Our most popular pedestal with dimensions that accommodate pedestrians and the majority of cars, SUVs, and pickup trucks.
This beautifully finished heavy duty stainless steel pedestal meets ADA specifications for intercoms, callboxes, keypads, etc.
This beautiful round, brushed stainless steel bollard has a top is tapered for an architectural design
$1,099.00
The perfect solution to extend the reach of your pedestal over a fence, hedge, foliage or other obstruction.
$178.00
The perfect solution to extend the reach of your pedestal over a fence, hedge, foliage or other obstruction.
$78.00
The perfect solution to extend the reach of your pedestal over a fence, hedge, foliage or other obstruction.
$156.00
Used for mounting on elevated concrete pads to bring it to car level.
$122.00
(1)
The perfect solution to extend the reach of your pedestal over a fence, hedge, foliage or other obstruction.
$50.00
A unique pedestal that solves the problem of mounting side-by-side electronics, such as a keypad and an intercom.
$179.00
Specially made for coastal and other wet regions where water, salt and other corrosive effects are possible.
$229.00
This pole is finished using a UV protected polyester safety yellow powdercoat.
$158.00
48" pedestal with a pad mount works for various vehicle and pad heights.
$98.00
Used for radio frequency card readers on a metal pole. Gives better card range.
$43.00
We can cut the holes you need for your devices in this 12" wide 54" tall tower
$1,179.00
We can cut the holes you need for your devices in this 8" wide 54" tall tower
$899.00
This pole accommodate larger vehicles like SUVs, delivery vehicles, and pickup trucks.
$229.00
This 64" pedestal accommodates tall cars, SUV, and small truck/bus height applications. Has an extra 22" for burial.
$82.00
This 64" pedestal accommodates tall cars, SUV, and small truck/bus height applications.
$229.00
This is a dual height pedestal with one extension at 72" and the other at 42".
$263.00
This is a dual height pedestal with one extension at 72" and the other at 42".
$1,150.00
This 72" pedestal accommodates buses, dump trucks, cement trucks, semi trucks, and other large transportation vehicles.
$469.00
This 72" pedestal accommodates tall SUV, truck and bus height applications.
$103.00
This 72" pedestal accommodates tall SUV, truck and bus height applications.
$229.00
This is a 72" tall by 4" x 6" stainless steel tower with single-gang cutout
$955.00
This 84" pedestal accommodates tall SUV, truck and bus height applications as well as cars.
$712.00
This 84" pedestal accommodates tall SUV, truck and bus height applications.
$695.00
Stud Anchor Pedestal Install Kit for existing concrete pads. Requires drilling holes.
$48.00
Best Pedestals in the Industry
Compared to the competition, our gate entry pedestals are hands down higher quality. Competing products are often made from thinner 0.074" wall tube, but these products are made from thicker 0.120" wall tube. That's 62% more steel! That's important when it comes to vandal abuse and withstanding forces of Mother Nature. These pedestals passed face-wind testing protocols that are equivalent to a sustained Category 5 hurricane force winds of over 150 miles per hour. Some pedestals have even been tested with wind up to 600 mph and only began to flex about 2 milli-meters. That's a wind speed over two times higher than the highest recorded tornado.The painted finish on these pedestal poles is also second to none. All products are first bead-blasted (like sand-blasting) to eliminate contaminants and blemishes. That leaves the ideal bonding surface for the top finish. They are powder coated with an outdoor-rated polyester finish with UV protectant to help promote longevity in any weather condition. The stainless steel pedestals provide excellent rust protection and beauty at a reasonable cost.
One of the nice features of all poles is that the mounting holes for the concrete fasteners are not visible. The architectural pedestals are mounted from the inside out using an access panel on the backside. For the gooseneck poles, a base cover sits over top of the mounting bolts.
These are just some of the applications for these access control pedestals:
Intercom Equipment
As an intercom post, these poles can hold wireless or wired intercom equipment. They have a standard gooseneck post mounting pattern on the mounting faceplate that is compatible with most intercom equipment. Custom poles can also be made.
Gate Access Control
One of the largest usages of these poles is as a gate keypad mounting post or a gate intercom post for the purpose of opening a security gate. As an intercom pole, they allow two-way communication and gate opening. If you add a video intercom you can also see visitors. If all you have is a keypad at the gate, then someone can enter a code to open the gate. You can also get intercoms with built in keypads that allow for both.
Card Readers
Card readers use proximity cards that allow visitors, employees or residents access to a property. A card reader pedestal mount is used to place the card reader near the access door. The card reader post is usually around 42" tall for people walking up to it. If the card reader uses wireless radio frequencies, we recommend using a plastic Buffer Plate mounted between the card reader pedestal and the card reader. This ensures that the metal of the pole does not interfere with the signal. We offer plastic buffer plates for this purpose.Every pedestal is wrapped in foam packaging and boxed individually for safe shipping.
There are optional mounting bolt kits available for purchase in the Related Items section on a product page.
Custom Solutions
If you need a custom solution we offer free in-house engineering and drawings within 48 hours of your request. Just email us a rough drawing with measurements, tell us what you are mounting, and we will create a CAD drawing for your approval.
Rather that relying on a local metal fabrication shops for your custom pedestal needs, which usually results in an amateur solution that doesn't last very long and makes a poor impression on employees and visitors, our shop will give you best-in-class, turn-key pedestal options that meets the industry’s highest standards for strength and construction.
There are two categories of pedestal solutions, industrial and architectural. Industrial pedestals are typically like the powder-coated gooseneck mounting post you see in industrial environments. Architectural designs are the brushed, stainless steel architectural tower-style pedestals that would look good in a multi-million dollar office tower. The cost difference is significant, but in architectural building construction it is an insignificant amount.
- Fast & Free CAD Design
- Mount any device
- Ready In 12-15 Business Days
- Material Options: Steel, Stainless, Aluminum
- Custom colors available
- No Minimum order quantities