Noise-Cancelling Base Station Intercom

The ZT1062 Noise-Cancelling Base Station Intercom is designed for use in very noisy indoor locations such as truck scale houses, industrial buildings, loading docks and plants. It is compatible with our noise-cancelling outdoor stations (ZT1032) or a additional ZT1062s in other noisy locations or can be paired with SIP/IP phone systems in quieter areas.

The ZT1062 provides true full-duplex two-way communication where both parties can talk and listen simultaneously without requiring push-to-talk. Advanced Active Noise Cancellation (ANC) with digital signal processing and automatic volume control keeps the audio clear even when the trucks, equipment or engines are running at maximum volume. In truck scale applications, operators hear the drivers crystal clear and the drivers hear the instructions equally clear.

The ZT1062 is a console-mounted (housing included) digital access panel with hands-free or it can be configured for push-to-talk operation. It has three programmable call buttons, a dedicated Talk button, and backlit LED indicators for call status, power and system fault. Each of the three speed dial buttons has two LED status indicators and customizable labels for station or function naming. An oversized Talk button is provided to answer and terminate incoming calls without using the speed dial keys.

This station uses a separate gooseneck microphone and base rather than a built-in mic. The gooseneck microphone allows the operators to speak directly into the microphone for optimal clarity and provides flexible mounting options. The reversible aluminum housing can be mounted to the wall to save counter space or on the desktop in the traditional fashion. The call buttons are protected by dust covers, allowing for use in harsh or contaminated environments.

The ZT1062 is a fully digital, PoE-powered base station with compatibility to third party SIP/VoIP systems. It can also act as a server and operate on its own private network. The ZT1062 can support up to 4 expansion modules of 8 buttons each for additional call buttons and advanced supervision capabilities.

Key Features

• Console-mount network access panel
• Ideal for truck scales and noise-cancelling intercom applications
• Full-duplex communication with ANC and DSP
• SIP/VoIP compatible with 3rd-party systems
• PoE powered with Ethernet connectivity
• Three programmable buttons with dual status indicators
• Dedicated Talk button for hands-free or push-to-talk operation
• LED indicators for power, call activity, and faults
• Compatible with up to four 8-button expansion modules
• Rugged construction with dust-protected buttons

Microphone Key Features

Specifications

Mechanical

• Dimensions: 5.67 × 3.78 × 41.63 inches
• Weight: 17.63 oz
• Mounting: Flush, in-console, desktop, or wall mount 
• Color: Black

Environmental

• Operating temperature: –10 °C to +60 °C
• Operating humidity: 10%–95% (non-condensing)
• Storage temperature: –40 °C to +70 °C
• Storage humidity: 10%–95% (non-condensing)
• Air pressure: 600–1300 hPa
• IP Rating: IP-32
• Magnetic compass safe distance: 60 cm
• IEC 60945 Category: Protected
• Operator reading distance: 0.71 m

Electrical

• PoE: 2 × RJ45 (Mode A or B)
• Voltage: IEEE 802.3af Class 0
• Auxiliary power: 16–48 VDC (24 VDC nominal)
• Power consumption: =2 W idle / 8 W max
• Digital I/O: 6 configurable
• Relay outputs: 2 (250 VAC/200 VDC, 2A)

Audio Input

• Balanced mic input
• Frequency response: 80 Hz–19 kHz
• Nominal input: 1–100 mVRMS
• SNR: >80 dB
• CMRR: >45 dB
• Impedance: 1 kO
• Input range: 10 mVRMS–1 VRMS

Audio Output

• Output power: 1 W
• Frequency response: 100 Hz–19 kHz ±3 dB
• SNR: 80 dB (A-weighted)
• THD+N: <1% @ 1 kHz, 8 O load
• Rated load: 8 O

Networking & Protocols

• 2 × RJ45, 10BASE-TX/100BASE-TX, Auto-negotiation, Auto-MDIX
• IPv4, SIP, TCP, UDP, HTTPS, RTP/SRTP, DHCP, SNMP, TFTP, NTP
• PoE (IEEE 802.3af), NAC (IEEE 802.1x)
• Web-based configuration (HTTP/HTTPS)
• Remote software updates and centralized monitoring
• Advanced supervision (tone test, status reports)
• SIP standards: RFC 3261, RFC 3515, RFC 2976, TLS support
• DTMF: RFC 2833, 2976

Certifications

• Immunity: EN 60945, EN 50130-4, EN 61000-6-1/-6-2, EN 55103-2, FCC Part 15B
• Emissions: EN 60945, EN 61000-6-3/-6-4, EN 55103-1, FCC Part 15B
• Safety: UL 60950-1, cUL 60950-1, IEC 60950-1 (CB scheme)
• Warranty: 2 years standard

Microphone Specifications