main view

IP Horn Speaker

Your Price: $1,295.00

This IP horn speaker connects to our high definition audio and video truck scale and gate intercom kits for one way broadcasts.

Part Number: ZT1045

Quantity

California Proposition 65 warning

Description

This horn speaker features a 10W Class D amplifier, powered over PoE. This means that the speaker is capable of delivering more than 116 dB. The Horn design is ideal for installation in challenging acoustic environments where increased directivity is key to intelligible audio.

You can connect additional horn speakers to a system and you are able to monitor and address each speaker individually.

The built-in microphone in the horn speaker enables intelligent features such as Automatic Volume Control.

Note: If you are using your own SIP-compatible telephone, you will need a SIP license from Related Items below.

Features:

Horn Speaker:

Crystal clear audio
10W Class D, built-in amplifier
Protected from dust and Water - IP66
116 dB SPL (1m)
Ideal for Micro Zone PA and systems that require a limited number of speakers
Each speaker is individually addressable and monitored
ONVIF Compatible
Ideal for speakers installed in remote locations, e.g. roads and railways
Remote software upgrade and configuration
Relay output for remote control, e.g. doors, signal lamps, gates
Powered from the IP network cable using Power over Ethernet (PoE)
Ideal for Building Security, Infrastructure and Industrial projects
Internal speaker amplifier 10 W class D
Max. sound pressure level at 1 meter 116 dB
Dispersion (-6dB) 1kHz / 4kHz 140° / 40°
Directivity factor, Q 1,8
Codecs G.711, G.722
Frequency range, G.722 Codec 200 Hz – 7000 Hz
Mounting Bracket (included)
Weight 1.8 kg / 4 lbs
Material / Color ASA (plastic) / RAL 7035 (light grey)
Electronics cover material ASA (plastic)
Gasket material Silicone rubber
IP Rating IP66, tested according to EN 60529
ENVIRONMENT AND COMPLIANCES
Operating temperature range -40° to 70° C / -40° to 158 ° F
Storage temperature range -40° to 70° C / -40° to 158 ° F
Relative humidity < 95% not condensing
EMC CE and FCC Part 15
HARDWARE
Ethernet connector 1 x RJ 45
All other connectors Tool less, spring loaded, vibration proof terminals
General inputs and outputs 6 (configurable)
Outputs 12mA as LED drivers
Change-over relay (NO+NC+COM) Max: 250VAC/220VDC, 2A, 60W
Power options PoE
PoE (power over Ethernet) IEEE 802.3af standard, Class 0 (0.44W to 12.95 W)
Power consumption Idle 1.8W, max 12W (depending on volume)
Audio line out / induction loop signal 600 Ohm
NETWORKING AND PROTOCOLS
Protocols IPv4 (with DiffServ), SIP, TCP, UDP, Unicast, Multicast, HTTPS, TFTP, RTP, DHCP, SNMPv2c, ONVIF, CCoIP® , NTP
LAN protocols Power over Ethernet (IEEE 802.3 a-f) Network Access Control (IEEE 802.1x)
Management and operation HTTP/HTTPS (Web configuration) DHCP and static IP + IC-EDGE™. Remote automatic software upgrade. Centralized monitoring
Advanced supervision functions E.g. network test, tone test, status reports
SIP support RFC 3261 (SIP base standard), RFC 3515 (SIP refer), RFC 2976 (SIP info)
DTMF support RFC 2833, 2976 (SIP info)
OTHER SPECIFICATIONS
OTHER SPECIFICATIONS
IP address information Speaks IP address after system boot
Country of manufacture Poland
Dimensions (HxWxD) 144 x 186 x 207 mm
Weight 1.65 kg
Encapsulation material ASA plastic
DIN-rail clips Wago 209 (included)
Boxed Weight 1.8 kg / 4 lbs
Box Dimensions (Width x Height x Depth) 250 x 210 x 170 mm

One SIP-Client Extension

$562.00

Free Shipping.

More Info